Rangs RAC-19SH 1.5 Ton Split Type AC

Type of AC : Split / Window/Light Commercial/VRF/Chiller ;   Split
Fixed Speed / Inverter   Fixed Speed
Cool only/ Heat & cool   Cool only
Capacity: Cooling capacity BTU 18000 BTU/HR
Power supply Rated Voltage Volts 220-240 V
Rated frequency Hz 50Hz
Running condition Withstanding Operating conditions : IDU °C 16-31
Withstanding Operating conditions : ODU °C 20-43
Cooling Area sq.ft 121-175
Lowest running voltage Volts 165
Highest running voltage Volts 264
Cooling Capacity at rated condition (If required) Watt 5275
Power consumption in rated condition Watt 1900
Cooling data SEER/EER/COP (If any special requirement) kWh / kWh 2.77
Cooling Input Current A 8.25
Max. Input Current A 14.10

Indoor Fan speed (Turbo) r/min 1200
Thermal protector Yes/ No yes
Fan Dimensions (Dia* Length) mm Φ108, L- 700±1
Material of Blades   SAN 30% GF
Evaporator Rows * Tubes No’s 2*18
Tube pitch (a) x row pitch (b) mm 21 x 12.7
Coil length mm 755
Tube specification mm ODΦ7.0 x 0.25 x0.18 IGT
Tube Material & Grade   DHP COPPER, C12200
Fin spacing mm 1.2
Fin type (Bare or Golden/Blue/Silver Coated)   Golden Coated
Fin Material   Aluminum
Control board Transformer Base/ SMPS Base   SMPS
PU/ Protective layer   PU
EMI/EMC compatible   EMI
Wi-Fi support , Connectivity Module inbuilt / Separate module   NO
Display PCB : LCD Display/ 7Seg Display/ LED indicators   7Seg Display
Swing Motors : Qty , Purpose   2, Left/right, Up/Down
Temperature sensor : Nos & Locations   2, air inlet, Eva inlet
Other Filter Type   Regular
Power cord & Plug : (Standerd name & version)   Yes
Connecting wire between IDU & ODU : Length ft 16.4
Connecting tube(CU with insulation) between IDU & ODU : Length ft 12
General Outdoor side noise level (Hi/Mi/Lo) dB(A) 59-Turbo; 58-High
Dimension : L*W*H (Including foot & service valve) mm 771 x 320 x 552
Packing : L*W*H mm 820 x 360 x 625
Weight : Net & Gross Kg 35±1 & 38±1
Max. discharge/Suction pressure MPa 4.15/1.15
Compressor Preferred Model   Samsung-UG8CH8180DJH
Type : Fixed speed / Inverter   Fixed Speed
Locked rotor Amp(LRA) A 46.0 A at 220 V
Thermal protector Yes/ No No
Over load Protector (Location)   internal
Capacitor (If applicable) uF 45
Fan motor Motor Type : Single Phase Induction   Induction
Motors Mechanical output Wattage Watt 35
Capacitor μF 3
Outdoor Fan speed R/min 850
Thermal protector Yes/ No Yes
Fan Dimensions (Dia* Hight) mm Φ400, H-115
Number of Blades No’s 3
Material of Blades   ABS 20%GF
Condenser Rows*Tubes No’s 2*24
Tube pitch(a)x row pitch(b) mm 21 x 12.7
Coil length mm 722 OR; 703 IR
Tube outside & Inside diameter mm ODΦ7.0 x 0.25 x0.18 IGT
Tube Material & Grade   DHP COPPER, C12200
Fin spacing mm 1.2
Fin Type   Bare
Fin Material   Aluminum
Expansion device Capillary/EEV Capillary
Length (IF capillary) mm 325
Diameter( Inside & Outside) (IF capillary) mm IDΦ1.6 x ODΦ3.0
Material (IF capillary)   Copper Tube
Other Gas/ Refrigerant Type   R-410a
Gas/ Refrigerant Qty Grams 1000
Yes/No Pcs Yes
RF / IR Based   IR